Roland SP-404MK2 Reference Manual Download

Page: 121 / 136

Appendix

121

Parameter

Value

Explanation

BPF

Applies the effect over a narrow frequency range.

SYNC

OFF, ON

When this is ON, the effect sound synchronizes with the

tempo.

Slicer

This slices the sound up into small pieces, creating the impression that a backing phrase is being played.

This slices up the sound at certain intervals into 16 parts (16 steps), breaking the sound into a rhythm that follows the sequence

pattern (a pattern used for slicing up the sound). This is effective when used with sustaining sounds.

Parameter

Value

Explanation

PATTERN

1–32

Sets the sequence pattern.

SPEED

0–100 (when the SYNC parameter is

OFF)

2/1 to 1/64T (bars; when the SYNC

parameter is ON)

Sets the period over which the sequence pattern repeats.

DEPTH

0–100

Sets the slicing depth. Larger settings make the slicing effect more

prominent.

SHUFFLE

0–100

Larger settings delay the timing of even-numbered steps (2, 4...).

MODE

Sets how the volume changes when the next step sounds.
LEGATO

The volume is not changed between steps.

SLASH

The volume is reset to zero before the next step sounds (at the

boundary between steps).

SYNC

OFF, ON

When this is ON, the effect sound synchronizes with the tempo.

Tremolo/Pan

Cyclically varies the volume or panning.

Parameter

Value

Explanation

DEPTH

0–100

Sets the depth of the effect.

RATE

0–100 (when the SYNC parameter is OFF)

1.000–0.010 (when the SYNC parameter is

ON)

Sets the cycle (period) of the effect.

TYPE

Sets the type of effect.

TRE

Cyclically changes the volume (tremolo).

PAN

Cyclically changes the panning.

WAVE

Sets how the effect modulates the sound.

TRI

Triangle wave

SQR

Square wave

SIN

Sine wave

SAW1, SAW2

Sawtooth wave

TRP

Trapezoidal wave

SYNC

OFF, ON

When this is ON, the effect sound synchronizes with the
tempo.

Chromatic PS

A two-voice pitch shifter that changes the pitch in semitone steps.

Parameter

Value

Explanation

PITCH1, PITCH2

-24–12 (semi)

Adjusts the amount that PITCH1 or PITCH2 is pitch-shifted.

BALANCE

100-0–0-100 (%)

Adjusts the volume balance between dry (the original sound) and effect sound.

PAN1, PAN2

L50–R50

Sets the panning of PITCH1 or PITCH2.

Hyper-Reso

This is a resonator effect that is adjusted to make creating melodies and bass lines easier.

Summary of Contents for SP-404MK2









































































































































Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands

Roland SP-404MK2, Reference Manual

Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands