Roland SP-404MK2 Reference Manual Download

Page: 66 / 136

Combining Samples to Create a Pattern (PATTERN SEQUENCER)

The unit enters pattern sequencer mode.

While holding down the [HOLD] button, press pads [1]–[16] to select the pattern chain number to play
back.

The PATTERN CHAIN screen appears.

Press the [SUB PAD] button.

The selected pattern chain plays back.
To stop playback, press the [SUB PAD] button again.

To exit pattern chain, press the [EXIT] button.

The unit returns to the PATTERN SELECT screen.

Sampling the playback of a pattern chain

You can sample (resample) the audio of a pattern chain as it plays back.

Press the [PATTERN SELECT] button.

The unit enters pattern sequencer mode.

Press the [RESAMPLE] button.

Press the [RECORD SETTING] button.

The input settings screen appears.

Use the [CTRL 2] knob to set ROUTING to “Mix”.

Press the [EXIT] button.

Press the pads [1]–[16] that are blinking red.

Empty pads to which samples haven’t been assigned blink red.
When you press an empty pad, the pad changes to blinking purple, and a message “Press Pad to START” is shown.

Press pads [1]–[16] while holding down the [HOLD] button to select the pattern chain to play back.

The PATTERN CHAIN screen appears.

Summary of Contents for SP-404MK2









































































































































Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands

Roland SP-404MK2, Reference Manual

Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands