Roland SP-404MK2 Reference Manual Download

Page: 27 / 136

Using the Effects

You can use the built-in effects on the SP-404MK2 to process the audio in unique ways.

Use the built-in effects on the SP-404MK2 by assigning them to a bus (an audio routing inside the SP-404MK2).

With BUS 1 and BUS 2, you can apply the effects that are appropriate for your performance, per sample. BUS 3 and BUS 4 are

mainly used to apply effects to the overall sound output from the SP-404MK2.

There are two kinds of bus routings (in connection order) that you can select as you like.

Refer to “

Configuring the Effect Routing

(P.93)” for how to edit the bus routings.

To switch between DRY Routing parameters, see “

DRY Routing

(P.

エラー

ブックマークが定義されていません。

)” in EFX SET.

Adding Effects to a Sample (BUS FX)

You can use the various effects built into the SP-404MK2 to process the playback audio in unique ways.

Summary of Contents for SP-404MK2









































































































































Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands

Roland SP-404MK2, Reference Manual

Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands