Roland SP-404MK2 Reference Manual Download

Page: 60 / 136

Combining Samples to Create a Pattern (PATTERN SEQUENCER)

Creating a New Pattern (TR-REC)

Here’s how to create a pattern by setting the sample playback timing at the position you like on the steps.

This method of recording is suitable for creating drum patterns.

Press the [PATTERN SELECT] button.

Press the [REC] button.

Empty pads in which no patterns have been recorded blink red.

The metronome sounds when the “Metronome:PTN” parameter is “ON”, which is the SYSTEM parameter “

CLICK

(P.109)”.

Press pad [9] while holding down the [SHIFT] button to turn the metronome sound on/off.

Press pads [1]–[16] that are blinking red to select the record destination pattern.

The unit enters pattern record standby mode, and the RECORD SETTING screen appears.

Press the [REMAIN] button.

The pattern recording method switches to “TR-REC”.

Set the parameters for the pattern.

Controller

Parameter

Value

Explanation

[CTRL 1] knob

BPM

40–200

Sets the pattern’s tempo.

[CTRL 2] knob

LENGTH

1–64
(measures)

Sets the length of the pattern.

[CTRL 3] knob

SHFL RATE

-50–+50

You can set how much to slide the timing of the upbeats (the

strength of the shuffle feel). A setting of “0” results in no shuffle.

Settings in the range of +10–16 generally give a pleasant shuffle

feel.

[SHIFT]

[CTRL 2] knob

TIME SIGN 1/4–7/4

Specifies the time signature.

[SHIFT]

[CTRL 3] knob

METRO

VOL

0–5

Sets the volume of the metronome.

[REMAIN] button

REC MODE

Selects how the pattern sequencer records.

Real-Time

Records in real time.

The [REMAIN] button lights up at this time.

TR-REC

Records using TR-REC.
The [REMAIN] button blinks at this time.

Press the [REC] button.

TR-REC pattern recording begins.

Press pads [1]–[16] while holding down the [SUB PAD] button to select a sample.

Set the parameters for the sample to input.

Controller

Parameter

Value

Explanation

[CTRL 1] knob

SUBSTEP

You can split up the steps into multiple and separate units (sub steps).

You can also configure how the split sub steps are played.

This is enabled when MODE is “TRIG”.

Value

Pattern

Summary of Contents for SP-404MK2









































































































































Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands

Roland SP-404MK2, Reference Manual

Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands