Roland SP-404MK2 Reference Manual Download

Page: 12 / 136

Playing Back Samples (SAMPLE MODE)

When bank A–E is selected, the bank [A/F]–[E/J] button lights up. When bank F–J is selected, the bank [A/F]–[E/J] button

blinks.

Adjusting the Volume for All Banks (BANK VOLUME)

Adjusts the volume for the specified bank overall. This lets you adjust the volume if the volume varies between banks.

Hold down the [SHIFT] button and press the bank [A/F]–[E/J] buttons.

The BANK VOLUME screen appears.

Turn the [VALUE] knob to set the bank volume.

When you are finished adjusting the values, press the [EXIT] button.

You may notice a difference in playback volume when copying or exchanging samples between different banks, due to the

differences in the BANK VOLUME parameters set for each bank.

Summary of Contents for SP-404MK2









































































































































Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands

Roland SP-404MK2, Reference Manual

Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands