Roland SP-404MK2 Reference Manual Download

Page: 56 / 136

Editing a Sample (SAMPLE EDIT)

If you want to keep your data or make sure it doesn’t get accidentally modified, we recommend that you follow the steps

in “

Backing up Your Data (BACKUP)

(P.105)” to create regular backups.

Deleting all samples in a bank at once

Hold down the [DEL] button and press the [EXIT] button.

The bank deletion screen appears.

Press the bank [A/F]–[E/J] buttons.

Select a bank to delete.

Press the [VALUE] knob or [DEL] button.

The samples in the selected bank are deleted.

You can’t restore a pad’s sample after it has been deleted.

If you want to keep your data or make sure it doesn’t get accidentally modified, we recommend that you follow the steps

in “

Backing up Your Data (BACKUP)

(P.105)” to create regular backups.

Summary of Contents for SP-404MK2









































































































































Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands

Roland SP-404MK2, Reference Manual

Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands