Roland SP-404MK2 Reference Manual Download

Page: 25 / 136

Playing Back Samples (SAMPLE MODE)

Stopping All Sample Playback (STOP)

You can make all samples and patterns that are currently playing back stop.

Press the [EXIT] button quickly four times.

All samples and patterns that are playing back stop.

You can also press the [EXIT] button while holding down the [SHIFT] button to stop all samples and patterns that are playing

back.

Pausing the Sound of a Sample (PAUSE)

You can make samples that are currently playing back pause.

Hold down the [SHIFT] button and press the [HOLD] button.

All samples that are playing back pause.

Hold down the [SHIFT] button and press the [HOLD] button again to resume playback.

The samples resume playback.

Summary of Contents for SP-404MK2









































































































































Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands

Roland SP-404MK2, Reference Manual

Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands