manualshive.com logo in svg

Rohde & Schwarz R&S LCX Series, User Manual

Share
Download
Rohde & Schwarz R&S LCX Series User Manual Download Page 39

Getting started

R&S

®

LCX Series

39

User Manual 1179.2260.02 ─ 02

Indicator

Description

GPIB/IEE-488

The IEE-488 bus interface (GPIB) connection is established.

See 

Chapter 10.4, "Connecting the R&S

 

LCX for remote access"

,

on page 158.

Time

Indicates the time set on the instrument.

See 

Chapter 9.6, "Date & time"

, 

on page 123.

Measurement status bar

The measurement status bar provides information on certain measurement modes,
functions and states. When activated, indicators displayed in white color represent the
corresponding functions.

For information on the measurement modes and functions, see 

"About measurement

parameters"

 

on page 73.

Table 4-8: Measurement status bar

Indicator

Description

Measurement mode

 

Measurement speed

Indicates the set measurement speed:

●

 fast

●

 medium

●

 slow

In triggered mode, the icon is grayed out.

See 

"Measurement Speed"

 

on page 76

"O", " S", "L"

Indicates if open, short, and load corrections are enabled.

●

white: enabled

●

gray: disabled

See 

Chapter 8.6.2, "Open/short/load correction settings"

, 

on page 78

"LowZ"

Low impedance measurement mode is set.

See 

"Source Impedance"

 

on page 76

"BIAS"

Indicates an activated BIAS:

●

"VBIAS": voltage bias, provided for capacitance measurements

●

"IBIAS": current bias, provided for inductance measurements

●

"eVBIAS": external voltage bias, for capacitance measurements

If disabled, the icons are grayed out.

See 

Chapter 8.4.1, "Test signal settings"

, 

on page 71

"Cable Length"

White indicates that the cable length is set. The R&S

 

LCX displays the

set value (currently only 1

 

m applicable).

See 

"Cable Length"

 

on page 76

Instrument control

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S LCX Series



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands