Instrument functions
R&S
®
LCX Series
85
User Manual 1179.2260.02 ─ 02
Creating user defined configuration presets
To create and save a configuration preset:
1. Select the configuration preset memory slot, e.g. .
2. Select to open the parameter settings dialog.
3. Set the corresponding parameters.
4. Press the home to return to the measurement window.
5. To preset additional configurations, select another configuration preset slot, e.g.
or .
6. Repeat
) until you have assigned all preset configurations.
Switching the configuration during a measurement
We assume, that you have setup measurement and a DUT applied.
To execute a measurement with changing configuration:
1. Select the measurement function required for the measurement.
2. Set the test signal parameters.
3. Select the measurement parameters for results display.
4. Assign the configuration presets as described in
"Creating user defined configura-
5. Start the measurement, e.g. using configuration preset .
6. Select, e.g. to continue the measurement with different settings.
While the measurement is running, you can switch between the preset configura-
tions arbitrarily.
8.8
Specific instrument functions
Specific instrument functions describes the features the instrument provides apart from
the basic measurement functions. Some specific functions require that the correspond-
ing options are installed.
Access:
1. Press the [settings] key at the front panel.
2. Select the "Functions" tab.
Specific instrument functions
www.allice.de
Allice Messtechnik GmbH
