manualshive.com logo in svg

Rohde & Schwarz R&S LCX Series, User Manual

Share
Download
Rohde & Schwarz R&S LCX Series User Manual Download Page 12

Safety and regulatory information

R&S

®

LCX Series

12

User Manual 1179.2260.02 ─ 02

Chassis grounding connection

Noiseless ground.

The input signal at these connectors must be free from external voltages. The measurement
results are otherwise incorrect.

1.3

 

Warning messages in the documentation

A warning message points out a risk or danger that you need to be aware of. The sig-
nal word indicates the severity of the safety hazard and how likely it will occur if you do
not follow the safety precautions.

DANGER

Imminently hazardous situation. Will result in death or serious injury if not avoided.

WARNING

Potentially hazardous situation. Could result in death or serious injury if not avoided.

CAUTION

Potentially hazardous situation. Could result in minor or moderate injury if not avoided.

NOTICE

Potential risks of damage. Could result in damage to the supported product or to other
property.

1.4

 

Korea certification class A

이

 

기기는

 

업무용

(A

급

) 

전자파

 

적합기기로서

 

판매자

 

또는

 

사용자는

 

이

 

점을

 

주의하시기

바라며

, 

가정외의

 

지역에서

 

사용하는

 

것을

 

목적으로

 

합니다

.

Korea certification class A

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S LCX Series



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands