manualshive.com logo in svg

Rohde & Schwarz R&S LCX Series, User Manual

Share
Download
Rohde & Schwarz R&S LCX Series User Manual Download Page 13

Welcome

R&S

®

LCX Series

13

User Manual 1179.2260.02 ─ 02

2

 

Welcome

2.1

 

Key features

The R&S

 

LCX LCR Meter sets standards in analyzing passive components. It provides

the full range of measurements to characterize resistors, capacitors and inductors, and
displays results as absolute, relative or average values.

Outstanding key features are:

●

Frequency range: 4

 

kHz to 300

 

kHz (R&S

 

LCX100), and up to 10

 

MHz

(R&S

 

LCX200)

●

Measurement functions: L, C, R, |Z|, X, |Y|, G, B, D, Q, Φ, ∆, M, N

●

Basic accuracy: 0.05 %

●

Continuous, manual or external control via interface, binning interface or trigger

●

Digital I/O ports and binning function for automatic sorting of components (option
R&S

 

LCX-K107)

●

LAN, USB interface for remote control, optionally IEEE-488 (GPIB) bus interface
(option R&S

 

NG-B105)

For details on the specification, see the data sheet.

Key features

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S LCX Series



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands