Rohde & Schwarz R&S LCX Series User Manual Download Page 2

Page: 2 / 242

This manual describes the instruments of the R&S

LCX Series, including options and measurement

accessories:

●

R&S

LCX100 LCR Meter(3629.8856.02)

●

R&S

LCX200 LCR Meter (3629.8856.03)

●

R&S

NG-B105 Option IEE 488 (GPIB) interface (5601.6000.02)

●

R&S

LCX-K106 Option advanced analysis (3630.1922.03)

●

R&S

LCX-K107 Option digital I/O ports and binning (3660.7741.03)

●

R&S

LCX-K108 Option extended bias (3692.9791.03)

●

R&S

LCX-K201 Option frequency upgrade 1

MHz (3630.1880..03)

●

R&S

LCX-K210 Option frequency upgrade 10

MHz (3630.1900.03)

●

R&S

LCX-Z1 Accessory test fixture for axial/radial lead type components (3639.2296.02)

●

R&S

LCX-Z2 Accessory Kelvin clip lead (3638.6446.02)

●

R&S

LCX-Z3 Accessory test fixture for SMD components (3639.2509.02)

●

R&S

LCX-Z4 Accessory test tweezers for SMD components (3639.2515.02)

●

R&S

LCX-Z5 Accessory transformer test cables (3639.2521.02)

●

R&S

LCX-Z11 Accessory BNC-to-BNC extension (1m) (3639.2538.02)

[email protected]

Internet:

www.rohde-schwarz.com

Subject to change – data without tolerance limits is not binding.
R&S

is a registered trademark of Rohde & Schwarz GmbH & Co. KG.

Trade names are trademarks of the owners.

1179.2260.02 | Version 02 | R&S

LCX Series

Throughout this manual, products from Rohde

Schwarz are indicated without the

symbol, and the instruments of the R&S

LCX

series are abbreviated as R&S

LCX. For example, R&S

LCX200 is indicated as R&S

LCX.

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S LCX Series



















































































































































































































































Search results

Summary of Contents for R&S LCX Series

Reviews:

Brands by name

Popular brands

Rohde & Schwarz R&S LCX Series, User Manual

Search results

Summary of Contents for R&S LCX Series

Reviews:

Brands by name

Popular brands