Rohde & Schwarz R&S LCX Series User Manual Download Page 130

Page: 130 / 242

General instrument settings

R&S

LCX Series

130

User Manual 1179.2260.02 ─ 02

"Model"

Designation of the instrument.

"ID"

Part number of the instrument.

"Serial No.:"

Serial number of the instrument.

"Version"

Currently installed firmware version.
How to: see

Chapter 9.11, "Update device"

on page 131

"FPGA"

Version of the installed FPGA.

"Hardware IDs"

Unique serial number of the front and mainboard of the instrument.

"Temperature in °C"

Note:

If the temperature exceeds the specification, the R&S

LCX dis-

plays a warning message.
Temperature of the CPU, connector board, H

CUR and L

CUR output

connectors, low current supply and Rfb (feedback resistor), indicated
in degrees.

"Misc"

Fan speed, IP address and memory capacity of the instrument.

Remote command:

SYSTem:HW:VERSion?

on page 220

Create Dump File

Saves the device information in a file.

9.10.2

Using the dump file function

The dump file function allows you to save the device information in the file format

*.rsd

. It saves data in a structured format. You can, export this file and forward it to

the service department, e.g. for analyzing or troubleshooting. Proceed as described in
the following example.

Creating a dump file

To create and export a device information file:

1. Press the [settings] key at the front panel.

2. In the "Device" tab, select "Device Information".

3. Select "Create Dump File".

The R&S

LCX generates a directory in the internal memory and saves the file

under

/int/service/service.rsd

4. To export the file:

a) Connect a USB memory device at the front panel USB B connector.
b) Press the [settings] key.
c) Select "File Manager".
d) In the internal memory, select

/int/service/

e) Select

/int/service/service.rsd

f) Copy the file with the copy left softkey to the USB directory.

Device information

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S LCX Series



















































































































































































































































Search results

Summary of Contents for R&S LCX Series

Reviews:

Brands by name

Popular brands

Rohde & Schwarz R&S LCX Series, User Manual

Search results

Summary of Contents for R&S LCX Series

Reviews:

Brands by name

Popular brands