manualshive.com logo in svg

Rohde & Schwarz R&S LCX Series, User Manual

Share
Download
Rohde & Schwarz R&S LCX Series User Manual Download Page 128

General instrument settings

R&S

®

LCX Series

128

User Manual 1179.2260.02 ─ 02

4. Select "Load File" to load the license file from the USB stick.

The R&S

 

LCX applies the license key. It displays a message "Devicekey is instal-

led".

Note: 

For the license to take effect, the R&S

 

LCX must reboot.

5. Switch the instrument off and on again using the On/Standby key.

The instrument restarts and activates the option and its features. It lists the option
in the "Active" window.

Inserting the license key manually

To enter the license key manually:

1. Get the sheet with the license key.

2. To access the license manager dialog, select [settings] > "Device" > "Licenses ".

3. Select "Add" to open the "Enter License Key" keypad.

Figure 9-13: License key on-screen keypad

4. Enter the key (30-digits) of the option in the entry box.

5. Review your input carefully.

6. Confirm with 

.

The R&S

 

LCX applies the license key. It displays a message "Devicekey is instal-

led".

Note: 

For the license to take effect, the R&S

 

LCX must reboot.

7. Switch the instrument off and on again using the On/Standby key.

The instrument restarts and activates the option and its features. It lists the option
in the "Active" window.

Removing a license key

To remove a registered option, you must also enter the license key. You can load the
license key either from the 

*.xml

 file or enter it manually.

1. To upload the key from the 

*.xml

 file, proceed as described in 

"Loading the

license key from a file"

 

on page 127.

Licenses

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S LCX Series



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands