Getting started
R&S
®
NGP800
22
User Manual 5601.5610.02 ─ 09
–
For four-channel models: two 8-pin terminal block plugs (P/N: 3639.1025.00)
for output connections
●
One printed Getting Started manual
●
One document folder containing a Basic Safety Instructions guide and CE certifi-
cate
4.1.4
Setting up the instrument
The R&S
NGP800 power supply series are designed for benchtop and rackmount
operation.
Risk of instrument damage due to high temperature
Operate R&S
NGP800 power supply in an area where the ambient temperature is
5 °C to +40 °C.
The R&S
NGP800 power supply is fan-cooled and must be installed with sufficient
space on the sides to allow proper air circulation. Ensure that fan openings are unob-
structed and airflow vents are unimpeded.
Operating the instrument with insufficient airflow or outside the allowable ambient tem-
perature can disrupt the operation and even cause damage.
4.1.4.1
Bench operation
On a benchtop, the R&S
NGP800 power supply can either lie flat or stand on its feet.
, feet on the bottom can be folded out to set the instrument in
an inclined position.
Figure 4-1: Inclined position
Positioning of instrument
The instrument must be positioned in a manner that allows you to disconnect the unit
from the mains at any time and without restrictions.
Putting into operation
