Rohde & Schwarz NG-B105 User Manual Download Page 41

Page: 41 / 201

Operating basics

R&S

NGP800

User Manual 5601.5610.02 ─ 09

1. Press [Home] key.

The R&S

NGP800 displays the home window.

2. Select the "Settings" button on the required channel display area.

Alternatively, press [Settings] key.

3. Select the "Device" tab to access the device menu.

Figure 5-9: Device menu

Menu

Description

"Graphical View"

Graphical display of available data source (e.g. voltage, cur-
rent, etc.)

"Arb Editor"

Programs the waveform of voltage and current settings for the
channel output.

"Tracking"

Changes made on voltage and current are applied to the
tracked channels.

"Logging"

Data logging on the instrument timestamp, voltage, current
and power.

"Digital I/O Trigger"

Available only with option R&S NGP-K103

Configures the digital I/O pins trigger modes and its associ-
ated settings.

"File Manager"

File transfer function between instrument internal memory and
USB stick.

"Interfaces"

Wireless LAN is available only with option R&S NGP-K102
and instrument with serial number below 110000.

IEEE-488 (GPIB) interface is available only with option NG-
B105.

Configures the network (LAN, Wireless LAN), USB interface
and GPIB address

"User Button"

Configures the shortcut key action (e.g. screenshot, trigger,
toggle logging, reset statistics, toggle touch).

"Screenshot"

Captures screen image of the instrument.

Front panel keys

Summary of Contents for NG-B105










































































































































































































Search results

Summary of Contents for NG-B105

Reviews:

Related manuals for NG-B105

Brands by name

Popular brands

Rohde & Schwarz NG-B105, User Manual

Search results

Summary of Contents for NG-B105

Reviews:

Related manuals for NG-B105

Brands by name

Popular brands