Rohde & Schwarz NG-B105 User Manual Download Page 94

Page: 94 / 201

Instrument functions

R&S

NGP800

User Manual 5601.5610.02 ─ 09

Figure 6-62: Device information dialog

Device information

Description

Model

Model of the instrument.

Instrument orderable part number.

Serial No.

Unique identification number for the instrument.

Version

Software version that is installed in the instrument.

Hardware IDs

Unique serial number of the front and channel
boards of the instrument.

Temperatures

Temperature in degrees measured in both Ch 1, Ch
2, Ch 3 and Ch 4.

If the temperature exceeded the specification, "Over
Temperature Protection" (OTP) is triggered and the
respective output channel is turned off.

Misc

Temperature measures for CPU.

Instrument IP address.

Fan speed and memory capacity in the instrument.

6.16.6

Update device

Latest instrument firmware is available in the R&S

NGP800 product homepage.

1. Select the "Update Device" to update instrument firmware.

The R&S

NGP800 displays the update device dialog.

General instrument settings

Summary of Contents for NG-B105










































































































































































































Search results

Summary of Contents for NG-B105

Reviews:

Related manuals for NG-B105

Brands by name

Popular brands

Rohde & Schwarz NG-B105, User Manual

Search results

Summary of Contents for NG-B105

Reviews:

Related manuals for NG-B105

Brands by name

Popular brands