Rohde & Schwarz NG-B105 User Manual Download Page 69

Page: 69 / 201

Instrument functions

R&S

NGP800

User Manual 5601.5610.02 ─ 09

Figure 6-26: Screenshot dialog

4. Select the "Save Location" to configure the screenshot file location.

● "Auto": Target folder is set to default file location:

–

With USB stick detected:

/USB1A/NGP/screenshot

for R&S NGP models

–

Without USB stick detected:

/int/screenshot

● "Manual": Choice of target folder.

5. Select the required save location.

6.10

Data logging

When data logging is activated, the R&S

NGP800 records the voltage, current and

power data and stores it in the predefined target folder. The measurement data can be
stored on the USB stick or in the instrument internal memory location.

1. Press [Settings] key.

The R&S

NGP800 displays the device/channel menu window.

2. Select the "Device" tab to configure data logger.

The R&S

NGP800 displays the device menu.

3. Select "Logging" menu item from the menu.

The R&S

NGP800 displays the "Logging" dialog.

Data logging

Summary of Contents for NG-B105










































































































































































































Search results

Summary of Contents for NG-B105

Reviews:

Related manuals for NG-B105

Brands by name

Popular brands

Rohde & Schwarz NG-B105, User Manual

Search results

Summary of Contents for NG-B105

Reviews:

Related manuals for NG-B105

Brands by name

Popular brands