Rohde & Schwarz NG-B105 User Manual Download Page 90

Page: 90 / 201

Instrument functions

R&S

NGP800

User Manual 5601.5610.02 ─ 09

1. Press [Settings] key.

The R&S

NGP800 displays the device/channel menu window.

2. Select the "Device" tab.

The R&S

NGP800 displays the device menu.

6.16.1

Licenses management

Options are enabled by entering a registered license key code.

You may choose to install from an XML file on USB or by manually entering the key
code.

► Select "Licenses" to install license key code.

The R&S

NGP800 displays the license dialog.

● "Active": Options that are currently active in the instrument
● "Inactive": Options that are currently not active in the instrument
● "Deactivation": Options that are expried or removed in the instrument

Figure 6-57: License dialog

To install an XML file, proceed as follows:

1. Copy the XML file containing the registered key code into the USB flash drive.

2. Connect the USB flash drive to the USB port of the instrument.

3. Select "Load File" to load the license file from the USB stick.

4. Select the license file to install in the instrument.

The R&S

NGP800 install the license option accordingly.

If the installation is successful, the option is displayed in the "Active" window.

To manually enter the key code, proceed as follows:

1. Select "Add" key to invoke the license key on-screen keyboard.

General instrument settings

Summary of Contents for NG-B105










































































































































































































Search results

Summary of Contents for NG-B105

Reviews:

Related manuals for NG-B105

Brands by name

Popular brands

Rohde & Schwarz NG-B105, User Manual

Search results

Summary of Contents for NG-B105

Reviews:

Related manuals for NG-B105

Brands by name

Popular brands