Rockwell Automation iTRAK, User Manual

Page: 87 / 124

Rockwell Automation Publication 2198T-UM002C-EN-P - March 2019 87
Maintenance Chapter 5
27. Torque the M6 x 30 socket head cap screws to 16 N•m (11.8 lb•ft).
28. Remove the magnet keeper and cardboard.
29. Follow Install or Replace a Mover on page 66 to install the mover on the
track.
Install Top and Bottom Straight Rails
Use this procedure to install top and bottom straight rails.
Before You Begin
The straightening bar can be used with the track motor modules in any of three
configurations that are shown in
Figure 29 .
Datum
Marks
Top Plate
Detail A
Detail A
M6 x 30 SHCS
Padded Bar Clamp
Place the top of the top
plate on a flat surface.
Flat Metal
Plate
ATTENTION: Before attempting any service to an iTRAK system. See Safety
Information on page 28 .