Rockwell Automation iTRAK, User Manual

Page: 16 / 124

16 Rockwell Automation Publication 2198T-UM002C-EN-P - March 2019
Chapter 1 Start
Power Supply The iTRAK system is powered using a scalable Kinetix 5700 iTRAK power
supply as part of a Kinetix 5700 system. Details and installation instructions on
for the use of the power supply are covered in Kinetix 5700 iTRAK Power
Supply and iTRAK Bus Conditioner Module Installation Instructions,
publication
2198T-IN001 .
Figure 8 - iTRAK Power Supply
iTRAK Bus Conditioner
Module The bus conditioner module is mounted near the iTRAK for each power cable
when using the iTRAK power supply. The packaging for the bus conditioner is
intended to be mounted in the same environments as the iTRAK system. It
incorporates additional filtering and capacitance to improve the dynamic servo
response and increase reliability of the system.
Figure 9 - 2198T-WBCMOD, iTRAK Bus Conditioner Module
2198T-W25K-ER, Kinetix 5700
iTRAK power supply is shown.
Item Description
1 Cable and connector to track system
2 Vent
3 Module
1
3
2