RJG Lynx LS-B-127-125, Product Manual

Page: 34 / 66

Lynx™ Strain Gage Button Sensors LS‑B‑127‑50/125/500/2000 | Product Manual 26 RJG, Inc.
INSTALLATION SPECIFICATIONS ( continued )
LYNX CASE MOUNTING
1.
Clamp Plate Installations
The Lynx sensor case is mounted parallel/front facing (faces direction in which the mold moves to
the mold movement for clamp plate installations to allow access to the Lynx cable. Install the Lynx
sensor case on the outside of the mold using the provided socket head cap screws 8‑32 x 1.75”
(M4—
not provided by RJG ).
8‑32 (M4 [4 Places])
Provide Clearance
between Lynx
electronics case and
ejector plate.
0.688”
(17,5 mm)
0.6”
(15 mm)
1.000”
(25,40 mm)
0.22”
(5,6 mm)