Riverbed Cascade Express, Installation Manual

Page: 46 / 92

Cascade Installation Guide
36
5. Log in to the
admin
account with the password you specified at the end of
the configuration task.
6. Navigate to the System  Devices/Interfaces page and check the status
of the data source devices on the Devices tab. When a data source comes
on line, the Express begins collecting data. At least one data source must
be listed with a green status indicator before you can complete the Express
installation verification step.
If no data sources are listed on the System  Devices/Interfaces page Devices
tab, then Express installation and configuration cannot be verified. Set up at least
one data source device (preferably all data source devices) and then perform the
installation verification described in the
Verification section below.
Additional configuration
Additional configuration can be performed by logging in to the Express GUI and
navigating to the
Configuration pages. For example, you may want to set up
security profile periods as early as possible.
The initial
Setup page offers the choice of collecting separate traffic profiles for:
•
Weekdays, weeknights, and weekends, or
•
Weekdays, weekends, Saturdays, and Sundays.
If you want to add more profiles or use a different profile scheme,
1. Log in to the Express.
2. Go to the Configuration

Security Profiles page.
3. Click Reconfigure Weekly Scheme to open the profile scheme composer.