Riverbed Cascade Express, Installation Manual

Page: 37 / 92

Cascade Installation Guide
27
3. Go to the System

Devices/Interfaces page and assure that each data
source that is expected to be available is listed and that no status indicators
are red.
4. Go to the Reports  Traffic page. Near the bottom of the Report
Criteria section, click Run now . Verify that a traffic report is displayed.
(It will take a short time for the report to display.)
Verifying Remote Management Module access
Verify that the RMMs can be accessed as follows:
1. On the network on which the RMMs are connected, point your browser to
the IP address that you specified for the Management Module RMM on
the
Setup page during the Configuration task. For example,
https://192.168.1.150
This displays the RMM login page.