Riverbed Cascade Express, Installation Manual

Page: 19 / 92

Cascade Installation Guide
9
Time Zone:
Flow encryption certificate (default or new certificate):
For faster installation, use the default encryption certificate shipped
with the Profiler and then generate a new certificate later.
SNMP information:
Profiler is set by default to use SNMP Version 1 and the SNMP
community name
mazu
(all lowercase) to allow MIB browsing. If you
are configuring SNMP at this time, obtain the necessary V1 or V3
information.
Outgoing mail server name, port number, and “From”
address.
Applies only if you will be specifying a server that Profiler is to use
for sending reports or alert notifications.
Inside addresses:
IP addresses or address ranges of hosts that the Profiler is to track
individually. The default values are 10/8,172.16/12,192.168/16
Security Profile settings:*
You can use either three traffic collection profiles (weekdays,
weeknights, and weekends) or four (weekdays, weeknights,
Saturdays, and Sundays). After installation, you can define others.
You can also specify the times when weekdays begin and end (default
times are 9:00 am to 5:00 pm).
NAS setup (IP address*, partition name*, directory name,
and partition size*):
Applies only if you are using a NAS device and are not using the
default Profiler settings.
Password to use for your initial Profiler login:*
The default password
admin
.
New password to enter when prompted to change the
initial Profiler password:*
Applies only to systems not previously configured.
Remote Management Module IP address
Remote Management Module netmask
Remote Management Module gateway