Riverbed Cascade Express, Installation Manual

Page: 24 / 92

Cascade Installation Guide
14
If no data sources are listed on the System  Devices/Interfaces page Devices
tab, then Profiler installation and configuration cannot be verified. Set up at least
one data source device (preferably all data source devices) and then perform the
installation verification described in the
Verification section below.
Additional configuration
Additional configuration can be performed by logging in to the Profiler GUI and
navigating to the
Configuration pages. For example, you may want to set up
security profile periods as early as possible. The initial Setup page offers the
choice of collecting separate traffic profiles for:
•
Weekdays, weeknights, and weekends, or
•
Weekdays, weekends, Saturdays, and Sundays.
If you want to add more profiles or use a different profile scheme,
1. Log in to the Profiler.
2. Go to the Configuration

Security Profiles page.
3. Click Reconfigure Weekly Scheme to open the profile scheme composer.
4. Specify the days and times of the traffic collection profiles you want to
use.
When you specify a new profile scheme, Profiler discards any current baseline
information and begins collecting new data.