Rittal BC 1007 HS, Manual

Page: 9 / 92

9
Rotating Clamp system
The rotating clamping system requires a light coat of multi-purpose oil such as 3-in-1, Super
Lube or air tool oil. Clean the clamp shafts before lubricating, dirt and debris can accumulate
on the clamping shafts and cause slow, hesitant movement or improper clamping.
Linear Bearings
Each axis (X, Y, Z & Enclosure table) has four linear bearings with grease inserts (16 total).
Note: It is important that only a recommended grease gun be used to grease the bearings. The
standard North American grease gun will lock on the grease fitting, removing it could tear the grease
insert out of the bearing housing.
2.5.1 Recommended Lubricant
The recommended lubricant used for the linear bearing system is;
KP2K-NLGI2, DIN 51818 Rittal Part Number: 4050.863