Rittal BC 1007 HS, Manual

Page: 27 / 92

27
Resetting PM Notifications
When a maintenance procedure is due, a maintenance pop-up screen will be displayed
before starting any automatic machining operation. This section describes how to clear and
reset the notifications.
3.11.1 Machine Parameters - Maintenance
To locate the Maintenance page;
o
Select [3] Service, [1]
Machine, [1] Machine
Parameters.
o
Select the Maintenance tab.
o
Select the maintenance item completed (Usually displayed in red if due).
o
Pressing [SHIFT-F5], will enter the current production hours and restart the PM count
down, for the selected item.
o
Only one item can be selected at a time. If multiple PM items need to be reset, select
them and press [SHIFT-F5].