Ricoh SP C222DN, Administration Manual

Page: 61 / 284

Installing the Printer and Options
16
2
Note
❒
When moving the printer, remove the optional paper feed unit.
❒
Before using the optional paper feed unit, you can make settings in the
printer driver.
❒
If the new device is listed in the column of configuration options, then it
has been properly installed.
❒
If the optional paper feed unit is not installed properly, reinstall it follow-
ing this procedure. If you cannot install it properly even after attempting
reinstallation, contact your sales or service representative.
Reference
For printing the configuration page, see Software Guide.
For loading paper into the paper tray, see p.34 “Loading Paper”.
When adjusting the printing position, see Software Guide.
Attaching Memory Unit Type F 256MB (DDR-SDRAM Module)
R
CAUTION:
Important
❒
Before touching the memory unit, ground yourself by touching something
metal to discharge any static electricity. Static electricity can damage the
memory unit.
❒
You can install the memory unit in the SP C221N and SP C222DN model
printers.
❒
Do not subject the memory unit to physical shocks.
A
Turn off the power, and then unplug the power cable.
B
Remove the memory cover.
• Before installing the memory unit, turn off the printer's power switch and un-
plug the power cable. After installing the memory unit, be sure to close the
memory unit cover, and then turn the machine back on. Do not turn on the
machine before closing the memory unit cover.
ASH026S