Ricoh SP C222DN, Administration Manual

Page: 182 / 284

Installing the Printer Driver Using USB
17
1
C
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
D
Click [ PCL 5c Printer Driver ] or [ PCL 6 Printer Driver ] .
The Printer Driver installer starts.
The software license agreement appears.
E
After reading the agreement, click [ I accept the agreement. ] , and then click
[ Next > ] .
F
In the [ Method to install printer driver ] dialog box, select the [ Connect a printer us-
ing a USB cable. ] check box, and then click [ Next > ] .
G
Select the printer you want to connect via USB, and then click [ Next > ] .
A message appears, asking you to check that the USB cable is not connected
and the printer's power switch is turned to OFF.
H
Check the USB cable and the printer status, and then click [ Next > ] .
I
When the [ <Auto-detect USB Port> ] dialog box appears, connect the printer to the
computer using a USB cable, and then turn the printer's power switch to ON.
USB auto detection begins.
J
If a message appears informing you that the installation was successfully
completed, click
[ Finish ] .
K
If a message appears informing you to restart the computer, click [ Yes, re-
start now. ] or [ No, restart later. ] , and then click [ Finish ] .
Note
❒
To disable Auto Run, press the
{
Shift
}
key when inserting the CD-ROM
into the drive and keep it pressed until the computer finishes reading from
the CD-ROM.
❒
The number after “USB” varies depending on the number of printers con-
nected.
❒
A confirmation message appears if the printer connection has failed. Check
the USB cable is connected and the printer's power is turned on, and then
click
[ Retry ] .
❒
To stop USB auto detection, click
[ Stop Auto-detecting ]
.