Ricoh SP C222DN, Administration Manual

Page: 242 / 284

77
8. Mac OS Configuration
Mac OS X
This section explains how to configure a Mac OS X to use EtherTalk and USB.
Important
❒
The procedures and functions described below are available only for Mac OS
10.2.8, 10.3.9, and any higher versions of 10.4.
Installing the PostScript 3 Printer Driver
A
Insert the CD-ROM into the CD-ROM drive.
B
Double-click the CD-ROM icon.
C
Double-click the [ Mac OS X ] folder.
D
Double-click the [ PPD Installer ] folder.
E
Double-click the package file icon.
F
Follow the instructions on the screen.
Setting Up the PPD File
A
Start Printer Setup Utility.
B
Click [ Add ] .
• Mac OS X 10.4 or higher
Click [ More Printers... ] . Then select the zone from the second pop-up menu.
• Other Mac OS X
Click [ AppleTalk ] on the first pop-up menu.
If the zone is set, select the zone from the second pop-up menu.
C
Select the printer, and then select its manufacturer from the [ Printer Model: ]
pop-up menu.
Under Mac OS X 10.4 or higher, manufacturer from the [ Print Using ] pop-up
menu.
A list of printer types appears.
D
Select the PPD file for the model you are using, and then click [ Add ] .
E
Quit Printer Setup Utility.