Ricoh SP C222DN, Administration Manual

Page: 273 / 284

Using Smart Organizing Monitor under the Macintosh Environment
4
Tray Priority
❖
Default Tray
Select the tray used for the priority paper source.
"Tray Priority" is the tray selected immediately after the printer is turned on,
and when Auto Select is chosen as the paper source for a job.
Bypass Tray
❖
Paper Size
In the [ Paper Size ] list, select the size of paper loaded in the input tray.
When
[ Custom Paper Size ]
is selected, specify the size in
[ Custom Paper Size ]
.
❖
Paper Type
In the [ Paper Type ] list, select the paper type.
❖
Custom Paper Size
• Unit
Select which units (inch or mm) to use for entering lengths in the [ Horizon-
tal ]
and
[ Vertical ]
boxes.
• Horizontal and Vertical
Enter the custom paper size when
[ Custom Paper Size ]
is selected. In the
units selected earlier (inch or mm), enter the length of the paper's short and
long edges in the
[ Horizontal ] and [ Vertical ] boxes respectively.
Note
❒
Available paper sizes vary depending on the paper tray. For details about set-
ting the paper size, see the printer operating instructions.