Ricoh SP C222DN, Administration Manual

Page: 129 / 284

Troubleshooting
84
7
Images are not printed in the
right position Adjust the printing position from Smart Organizing Moni-
tor.
See Software Guide.
Images are printed diagonally
to the pages Adjust the front end paper guide and both side paper guides
to match the paper size.
See p.34 “Loading Paper”.
Vertical line appear. The intermediate transfer belt is dirty.
Follow the procedure below to clean the belt:
A
Open the top cover while the power is on.
B
Remove all print cartridges from the printer.
C
Close the top cover with both hands carefully.
The printer enters cleaning mode automatically.
D
When cleaning finishes, open the top cover and reinsert
all the print cartridges.
If this procedure does not resolve the problem, contact your
service representative.
Horizontal lines appear on the
printed paper. • Impact can cause lines to appear on printed paper and
other malfunctions.
Protect the printer from impact at all times, especially
while it is printing.
• If lines appear on prints, turn the printer off, wait a few
moments, and then turn it back on again. Then, perform
the print job again.
Paper is not fed from the select-
ed tray. When you are using the Windows operating system, the
printer driver settings override those set using the control
panel. Set the desired input tray using the printer driver.
See the printer driver Help.
A printed image is different
from the image on the compu-
ter's display. When you use some functions, such as enlargement and re-
duction, the layout of the image might be different from that
displayed in the computer display.
Status Possible Causes, Descriptions, and Solutions
ASH102S
ASH103S
ASH104S