Ricoh SP C222DN Administration Manual Download Page 125

Page: 125 / 284

Troubleshooting

Windows XP Home Edition

Access the

[

Control Panel

]

window from

[

Start

]

on the taskbar.

Click

[

Printers and Other Hardware

]

Click

[

Printers and Faxes

]

Click to select the icon of the printer. Next, on the

[

File

]

menu, click

[

Proper-

ties

]

Click the

[

Ports

]

tab.

Check the

[

Print to the following port(s).

]

box to confirm that the correct port is

selected.

If the port such as LPT1 is not correct, reinstall the driver.

Reference

For details about installation and port setting, see Software Guide.

Windows Vista

Click

[

Control Panel

]

on the

[

Start

]

menu, and then click

[

Printer

]

in the “Hard-

ware and Sound”.

Click to select the icon of the printer. Next, on the

[

File

]

menu, click

[

Proper-

ties

]

Click the

[

Ports

]

tab.

Check the

[

Print to the following port(s).

]

box to confirm that the correct port is

selected.

If the port such as LPT1 is not correct, reinstall the driver.

Reference

For details about installation and port setting, see Software Guide.

Mac OS X

When the printer is connected to Mac OS X and the

Ready

indicator does not

flash or light up, try the following procedures to check the port connection.
• Use

[

About This Mac

]

to check the USB information.

• Use the printer browser to check if the printer is displayed.

Summary of Contents for SP C222DN


























































































































































































































































































Search results

Summary of Contents for SP C222DN

Reviews:

Brands by name

Popular brands

Ricoh SP C222DN, Administration Manual

Search results

Summary of Contents for SP C222DN

Reviews:

Brands by name

Popular brands