T
echnical
B
ulletin
PAGE: 1/4
Reissued: 17-Oct-19
Model: Shepherd-Lt
Date:
15-Oct-19
No.:
RM0D4006a
subject: Field Service Manual Correction Installation
Checking the Table Surface Parallel
Prepared by: D.Kobayashi
From:
Regional Sales Department, Global IP Sales Center
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety
Other (
)
Tier 2
Tier 0.5
This RTB is revised as suffix A.
Revised point is in
Red.
Service manual correction
Please apply the following corrections to your Pro TF6250 field service manual, in section:
2. Installation>Main Machine Installation>Installation Procedure>Checking the Table
Surface Parallel
Descriptions were corrected in Step 26.
26.
Adjust the table height using the two screws and the nut under the adjustment spot, so
that the sensor head indicates the reference value calculated in step 19.
The person inside of the table adjust the screws by the instruction of the
person outside.
The two screws and the nut are assembled as shown below.
No.
Description
No.
Description
[A]
Table
[D]
Adjustment screw
*2
[B]
Body Frame
[E]
Bolt for fixing adjustment
screw to table
*3
[C]
[E]
[B]
[D]
