T
echnical
B
ulletin
PAGE: 12/23
Model: Shepherd-Lt
Date: 7th
-Oct-19
No.:
RM0D4011
example, when connecting the tubes of the sub tank for C ink, connect the ink tube at the
front with the ink tube [A], connect the ink tube at the middle with the ink tube [B], and
connect the ink tube at the rear with the ink tube [C].
•
For W/C/M/Y/K ink, three ink tubes from the sub tank need to be connected for each color. For
Pr ink, one ink tube from the sub tank needs to be connected. For Cl ink, two ink tubes from
the sub tank need to be connected. Leave the unused ink tubes from the sub tanks (one tube
for Cl, two tubes for Pr) with the fittings attached.
3. Check the connector of the print head to amplifier board is set correctly.
If the connector is not set correctly, print head may be broken by short circuit.
