T
echnical
B
ulletin
PAGE: 10/23
Model: Shepherd-Lt
Date: 7th
-Oct-19
No.:
RM0D4011
5.
Place the cup under the first front ink tube[A] of the sub tanks.
Each sub tank has three ink tubes as shown below. The three ink tubes are arranged in a line
from front to rear.
Example below: Ink tubes of the sub tank for Pr.
6.
Open the fitting and discharge the ink completely, then close the fitting.
Three ink tubes will be clean as same operation, so select one tube to perform to clean at
this step.
7.
Repeat step 6 and 7 to all colors of first front sub tank tube to clean.
8.
Repeat step 1 to 8 for the second tubes to clean.
9.
Repeat step 1 to 8 for the third tubes to clean.
Restart the Print Control Software if ink pumping does not start after the power on button on.
[A]
