T
echnical
B
ulletin
PAGE: 4/4
Model:
Shepherd-Lt
Date:
28-May-19
No.:
RM0D4004
When tightening the screw [C], it is not necessary to tighten it too hard, it is just contact
to the print head mount [D].
・
After the adjustment, print the test pattern and check the two dotted lines.
If two dotted lines do not be overlapped, then rotate the screw [B] clockwise little bit more.
Perform the
adjustment until the two dotted lines become overlapped and deviation
amount become within the standard value.
