T
echnical
B
ulletin
PAGE: 1/4
Model:
Shepherd-Lt
Date:
28-May-19
No.:
RM0D4004
subject: Field Service Manual Correction Installation
Prepared by:
D.Kobayashi
From:
Regional Sales Department, Global IP Sales Center
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety
Other (
)
Tier 2
Tier 0.5
Service manual correction
Please apply the following corrections to your Pro T7210 and Pro TF6250 field service
manual, in section:
2. Installation>Main Machine Installation>Installation Procedure>Print Head Front
and Back Position Adjustment
Additional step in
red
for Step 3-3 and 4-3
Step 3-3
Rotate the adjustment screw [B] for the print head [A] (for the cyan nozzles) of the second
row to correct the displacement.
・
If the line on the left side is lower than the line on the right side: The print head is
displaced towards the front. Rotate the screw [B] clockwise to correct the displacement.
・
If the line on the left side is upper than the line on the right side: The print head is
displaced towards the rear. Rotate the screw [B] counter-clockwise to correct the
displacement.
