T
echnical
B
ulletin
PAGE: 3/3
Model:
Shepherd-P1, Lt
Date: 1
-Sep-19
No.:
Do not use the stick to clean inner air purge port fitting connector.
It may be broken the connector or occur ink leak from them.
(3) Air purge jig
Clean inner Air purge jig fitting connector by wiping cloth same as step1 and step2.
Then make sure that there is no ink inner the air purge jig fitting connector.
3. Get back the cover over the air purge port
Close the cover to avoid Ink will be cured by fluorescent light.
Keep air purge port cover closing when not needed.
