T
echnical
B
ulletin
PAGE: 19/23
Model: Shepherd-Lt
Date: 7th
-Oct-19
No.:
RM0D4011
3. Exit the Print Control Software, and then start up it again.
It is necessary to re-start the Print Control Software for activating the FPGA circuit which works
white ink circulation.
4. Leave the machine for 10 minutes.
The circulation pumps drive continuously, and the white ink will be filled in the circulation path.
5.
Change the setting value in [Circulation Pump Period] from "60" to "3600", and then click the
[Apply] button.
The circulation pumps will stop after 60sec working.
2. Installation>Main Machine Installation>Installation Procedure>
Removing the Air
Bubbles
Removing the Air Bubbles
Use this procedure to eject unnecessary air and cleaning liquid inside the print heads with the air
bubble ejection tool provided with the machine.
•
The procedure described in this section is for the service engineer. It is different from the
procedure for the user in the user's manual "Operating Instructions".
•
Before you start this procedure, make sure that the bottle of the air bubble ejection tool is
empty.
1. Close all doors. And, enter the Service Mode in the Print Control Software.
2. Click [Left] in the Print Control software to move the carriage [A] to the ink receiver [B].
