17 January, 2003
USER MAINTENANCE
2-1
Pr
eventive
Maintenance
2. PREVENTIVE
MAINTENANCE
2.1 USER MAINTENANCE
The following maintenance kits are available for the customer to do PM.
Type A
Color (C/M/Y) PCU
50KP
Type B
Color (C/M/Y) Development Unit
100KP
Type
C
Fusing
Unit
100KP
Type D
Black Development Unit / Dust Filter
100KP
Type E
Waste Toner Bottle
50KP
Type
F Black
PCU
50KP
Type
G
Oil
Supply
Unit
30KP
Type H
Paper Feed Rollers
150KP
Chart: A4 (LT)/5%
Mode: 5 prints/job
Environment: Normal temperature and humidity
Yield may change depending on circumstances and print conditions.
When the machine’s default settings are used, an error message is displayed when
a maintenance counter reaches the value in the PM table below, except for the
items in maintenance kit H.
NOTE:
To have the machine display the message for maintenance kit H also, set
SP5-930-4 to 1.
After the user replaces the items in a maintenance kit, the machine automatically
resets the counter for this maintenance kit, except for the items in kit H.
NOTE:
Except for the items in kit H, the machine can automatically detect when
new items have been installed.
The machine stops when the counters for parts in maintenance kits E and G reach
the replacement value in the following table.
NOTE:
To have the machine display the alert only for maintenance kits E and G,
set SP5-930-3 to 0.