
NVRAM DATA DOWNLOAD
17 January, 2003
5-102
5.9 NVRAM DATA DOWNLOAD
After doing the memory all clear procedure, NVRAM data will be reset to their
default settings. So, it is necessary to upload the NVRAM data before clearing the
NVRAM, and to download the NVRAM data afterwards.
NVRAM Data Upload (SP5-824)
1. Turn off the main switch.
2. Remove the cover [A].
3. Insert the flash memory card [B] into the card slot.
4. Turn on the main switch.
5. Access the SP mode 5-824.
6. Select
EXECUTE
to download the NVRAM data.
7. Turn the main switch off, and then remove the
card.
NVRAM Data Download (SP5-825)
NOTE:
This procedure downloads all the settings stored in the NVRAM except for
the following items.
•
Electrical Total Counter (SP7-003)
•
Machine’s Device Number
•
C/O, P/O Counters (SP7-006)
•
Duplex, A3/DLT/Over 420 mm, Staple and Scanner application scanning
counters (SP7-007).
•
Plug and Play brand name and production name settings (SP5-907)
1. Turn off the main switch.
2. Remove the flash memory card cover [A].
3. Insert the flash memory card [B] into the card slot.
4. Turn on the main switch.
5. Access the SP mode 5-825.
6. Select
EXECUTE
to download the NVRAM data.
7. Turn the main switch off, and then remove the card.
Note that the following errors may occur during downloading:
•
If a card is not installed in the card slot and a message tells you that downloading
cannot proceed, you cannot execute downloading, even by pressing
EXECUTE.
•
If the correct card for the NVRAM data is not inserted in the card slot, after you
press
EXECUTE
a message will tell you that downloading cannot proceed
because the card is abnormal and the execution halts.
G080S910.WMF
[B]
[A]