17 January, 2003
FUSING
6-71
D
etailed
D
escr
iptions
6.8.5 WASTE OIL
Bottle Set Sensor
Excess fusing oil is collected in the waste oil bottle [H] through the pipe [I]. There is
a feeler [E] behind the waste oil bottle holder [G]. The feeler is linked to the bottle
set sensor [D]. The feeler is pushed when the bottle is in the holder and the holder
is set in place.
NOTE:
1) The feeler goes through an opening [F] on the rear side of the holder.
The bottle pushes the feeler directly.
2) The bottle set sensor is checked when the main switch is turned on or
when the front or left door is opened and closed.
If the sensor does not detect the bottle, the
message, “Reset Waste Oil Bottle correctly”, is
displayed. This message is cleared after the
bottle is set and the front cover is closed (or the
main switch is turned off and on). Just opening
and closing a cover or door does not clear the
message.
G080D712.WMF
Reset Waste Oil
Bottle correctly
G080D925.WMF
[A]
[B]
[C]
[E]
[F]
[G]
[H]
[I]
[D]