
LASER EXPOSURE
17 January, 2003
6-24
6.3.4 DUAL BEAM WRITING
Dual Beam Mechanism
The LD unit for black has two laser diodes. Each face of the polygon mirror writes
two main scan lines. This only happens for black and white printing.
Laser Beam Pitch Change Mechanism
There is a spring [A] at the front end of the black LD unit [E], and there is a
positioning motor [D] at the right end. The spring pushes the unit clockwise, while
the motor pushes it counterclockwise. These two components drive the unit to one
of the following three positions:
•
600-dpi position [
➀
]
•
1,200-dpi position [
➁
]
•
Home position
[
➂
]
Before it is driven to the 600-dpi position or the 1,200-dpi position, the black LD unit
is set to its home position. When driven from one position to another, the unit goes
as follows:
•
600-dpi position
→
Home position
→
1,200-dpi
position
•
1,200-dpi position
→
Home position
→
600-dpi
position
The home position is detected by the home position sensor [B]. When the unit is in
its home position, the actuator [C] is out of the sensor. The 600-dpi and 1,200-dpi
positions are determined by the distance from the home position. The distance is
calculated from the operation time of the LD positioning motor.
G080D943.WMF
1
2
3
G080D926.WMF
[E]
[C]
[A]
[D]
[B]