Ricoh FAX2050L Advanced Instruction Manuals Download Page 69

Page: 69 / 216

iii

Safety Information

When using your equipment, the following safety precautions should always be
followed.

Safety During Operation

In this manual, the following important symbols are used:

WARNING:

Indicates a potentially hazardous situation which, if instructions
are not followed, could result in death or serious injury.

CAUTION:

Indicates a potentially hazardous situation which, if instructions are not
followed, may result in minor or moderate injury or damage to property.

•

Connect the power cord directly into a wall outlet and never use an ex-
tension cord.

•

Disconnect the power plug (by pulling the plug, not the cable) if the
power cable or plug becomes frayed or otherwise damaged.

•

To avoid hazardous electric shock or laser radiation exposure, do not
remove any covers or screws other than those specified in this man-
ual.

•

Turn off the power and disconnect the power plug (by pulling the plug,
not the cable) if any of the following conditions exists:

•

You spill something into the equipment.

•

You suspect that your equipment needs service or repair.

•

Your equipment's cover has been damaged.

•

Do not incinerate spilled toner or used toner. Toner dust might ignite
when exposed to an open flame.

•

Disposal can take place at our authorized dealer or at appropriate col-
lection sites.

•

Dispose of the used toner cartridge in accordance with the local reg-
ulation.

Summary of Contents for FAX2050L Advanced

























































































































































































































Search results

Summary of Contents for FAX2050L Advanced

Reviews:

Related manuals for FAX2050L Advanced

Brands by name

Popular brands

Ricoh FAX2050L Advanced, Instruction Manuals

Search results

Summary of Contents for FAX2050L Advanced

Reviews:

Related manuals for FAX2050L Advanced

Brands by name

Popular brands