Ricoh FAX2050L Advanced, Instruction Manuals

Page: 54 / 216

Troubleshooting
44
4
Error Messages
The following messages may appear while you are operating or programming
the machine.
CHECK AUTO-DIALING
You cannot use the auto-dialer at the moment.
Use the ten key pad or the external telephone.
NO FILE EXISTS
No polling reception operations have been
programmed.
There are no messages in memory waiting for
transmission.
Incorrect file number. Check the file number
and try again.
TOO MANY DEST.
The memory cannot hold any more telephone
numbers. Either:
• Delete some numbers then try again.
• Wait until some of the Send Later or other
delayed transmissions waiting in memory
have been carried out, then try again.
USED AS GROUPDIAL
This Quick Dial key has a Group stored in it.
USED AS PROGRAM
This Quick Dial key has a Keystroke Program
stored in it.
USED AS DIAL
This Quick Dial key has a telephone number
stored in it.
USED AS GROUP KEY
This Quick Dial key is programmed as Group
key.
NOT PROGRAMMED
Either:
• This Quick Dial key or Speed Dial Code
does not contain a number.
• This Quick Dial key does not contain a
Keystroke Program.
ALREADY PROGRAMMED
Either:
• This number is already included in this
Group.
• This OWN NAME/FAX NUMBER has al-
ready been stored for use with this feature.
PLEASE SET PAUSE
You must add a pause after your area code
when you input your fax terminal's own tele-
phone number.
ADD TONER
The toner cartridge is empty. Install a new car-
tridge.
CLEAR ORIGINAL
A document is jammed in the feeder.
CLEAR COPY
Paper is jammed in the printer.