OPTIONAL FINISHING
❐
Duplex mode (from an even number of one-sided originals to two-sided copies
in Top to Top orientation) and Margin Adjustment (0.2" width right margin for
the back side) are default settings. If you want to change the modes, touch the
[Duplex/Series Copies] and [Adjust Image] keys. You can change this default
setting with the user tools.
☛
See pages 141 and 143.
Sorting Into Sets (123,123,123) (Sort)
Copies can be assembled as sets in
sequential order by sliding the shift
tray from side to side.
Note: This function can be used only when your machine is equipped with
the optional finisher.
Notes for Sort mode
❐
You can make up to 999 copy sets at a time. However, when the number of
copies exceeds the capacity of the shift tray, remove copies from the copy tray.
Regarding the capacity of finisher,
☛
see the table on page 97.
❐
Different size originals can be used only when you make one-sided copies from
one-sided originals.
❐
After starting copying, the only setting you may change is image density, The
change will apply from the next copy.
☛
See page 37.
❐
The maximum number of pages that can be stored is as follows:
A4, 8
1/2
" x 11":
Approximately 100 pages (images)
❐
You can change settings of this mode using the user tools.
☛
See page 151.
❐
When you make two-sided copies, the maximum number of copies stacked in
the duplex unit at a time is limited. For details,
☛
see page 45.
na-6-3
OPTIONAL FINISHING
96