manualshive.com logo in svg

Ricoh Aficio 400, User Manual, Page: 112 / 170

Share
Download
Ricoh Aficio 400 User Manual Download Page 112

Adjust Image (continued)

Problem

Cause

Action

In Margin Adjustment
mode, parts of the original
image are not copied.

You set the wide margin.

Set the narrower margin using
the user tools.

☛

 See page 142.

In Image Repeat mode, the
original image is not copied
repeatedly.

You selected the same size copy
paper as originals, and did not
select the proper reproduction
ratio.

Select copy paper larger than
originals.
 

☛

 See page 91.

Select the proper reproduction
ratio.
 

☛

 See page 91.

Stamp

Problem

Cause

Action

Auto Stamping does not ap-
pear on copies.

The original is not set correctly.

Set originals correctly.

☛

 See page 76.

Original image and Auto
Stamping overlap on cop-
ies and original image can-
not be read.

You selected the solid density.

Change the density of Auto
Stamping using the user tools.

☛

 See page 146.

Your original has narrow margins
on four sides.

Change the stamping position.

☛

 See page 76.

User Stamping does not ap-
pear on copies.

User Stamping is not registered
correctly.

Register User Stamping again
using the user tools.

☛

 See page 152.

The low density image is
registered.

Register User Stamping again
with the high density original
using the user tools.

☛

 See page 152.

The original is not set correctly.

Set originals correctly.

☛

 See page 76.

na-7

IF YOU CANNOT MAKE COPIES AS YOU WANT

114

Summary of Contents for Aficio 400











































































































































































Reviews:

No comments