manualshive.com logo in svg

Ricoh Aficio 400, User Manual, Page: 74 / 170

Share
Download
Ricoh Aficio 400 User Manual Download Page 74

2

Touch the [Background Num-
bering] key. 

3

Enter the number you want to
print on the first set using the
Number keys.

❐

To change the entered number,
touch the [C] key or press the
Clear/Stop key. Then, enter the new
number.

4

Touch the [Exit] key.

5

Set your originals (

☛

 see pages

30 ~ 33) and press the Start key.

Printing Preset Messages On Your Copies
(Auto Stamping) - English Only

NOTE:  If your machine is the metric version, this function cannot be used

as a default setting. If you want to use this function, contact your
sales or service representative.

One of the following seven messages
can be stamped on copies. 

URGENT, COPY, PRIORITY
PRELIMINARY, CONFIDENTIAL, 
For Your Information,
For Internal Use Only

*A frame is printed around the message.

❐

You can change some settings of Auto Stamping (stamping position, size, den-
sity) using the user tools. 

☛

  See pages 146 ~ 147.

❐

One message can be stamped at a time.

❐

Regarding functions that cannot be used together with this function, 

☛

 see

page 105.

na-6-2

PRINTING ID NUMBERS, PAGE NUMBERS, AND MESSAGES (Stamp)

75

Summary of Contents for Aficio 400











































































































































































Reviews:

No comments